Light Forming DS Concrete Accessories: Dayton Superior Jahn Tie Extender is designed to convert 4-3/4" L&W (short) snap ties into 8-1/4" L&W (long) snap ties. The A-86 tie extender ... MORE > DS Concrete Accessories: Dayton Superior A-3 Standard Snap Ties are manufactured with either hot or cold forged integral heads. A-3 snap ties have a nominal 1" breakback with ... MORE > DS Concrete Accessories: Dayton Superior A-3 Heavy Snap Ties are used when a higher safe working load is required. The A-3 snap tie is manufactured with cold forged integral h... MORE > DS Concrete Accessories: Dayton Superior A-4 Hex Head Snap Ties are manufactured with hot forged integral 1/2" hex shaped heads. The hex head allows short-end snap ties to be ... MORE > DS Concrete Accessories: Dayton Superior A-5 Threaded PullOut Tie is manufactured with a standard forged head on one end and 2" of 1/4" - 28 UNF-2A thread on the opposite end.... MORE > DS Concrete Accessories: Dayton Superior A-6 Spandrel Point Tie is available for tying light outside spandrel beam forms. One end is fabricated with a standard end with any st... MORE > DS Concrete Accessories: Dayton Superior A-7 Spandrel Hook Tie is available for securing light outside spandrel beam forms to structural steel beams. The A-7 is similar to the... MORE > DS Concrete Accessories: Dayton Superior A-7-A Spandrel Plate Tie is used in the same type applications as the A-6 Spandrel Point Tie. The A-7-A tie is fabricated with a 16 ga... MORE > DS Concrete Accessories: Dayton Superior A-9 Tip-To-Tip Tie is a plain rod with headed ends. The A-9 tie is usually withdrawn from the concrete or cut-off after stripping the ... MORE > DS Concrete Accessories: Dayton Superior A-10 Plate Tie is equipped with a flat washer at one end of the tie. The A-10 tie is used as an external tie for light column forms an... MORE > DS Concrete Accessories: Dayton Superior A-16 Omni Wedge is a high strength snap tie wedge designed to slip over the head of standard or heavy duty snap ties to provide ample ... MORE > DS Concrete Accessories: Dayton Superior A-18 Panel Bolt is used in conjunction with the A-16 Omni Wedge to fasten adjoining studs. The standard panel bolt accepts two studs d... MORE > DS Concrete Accessories: Dayton Superior A-19 Corner Washer is fabricated from 3/16" x 3" flat stock bent to form a wedge block. The ample bearing flanges are drilled for nail... MORE > DS Concrete Accessories: Dayton Superior A-21-U Strap Tie is used to align, tie and secure steel frame form panels. Ties are available for wall thickness of 6" through 24" in ... MORE > DS Concrete Accessories: Dayton Superior A-21-B Combination Strap Tie/Snap Tie is designed for use on special forming applications which require steel frame forms on one side ... MORE > DS Concrete Accessories: Dayton Superior A-21-C Panel Clamp is used to clamp two 3/16" steel sections together. The clamp is fabricated from durable ductile steel for a good s... MORE > DS Concrete Accessories: Dayton Superior A-21-K Tie Key is used to secure the tie to the form. The A-21-K key is 4" long and tapers from 3/8" to 1/8". Each tie requires four (... MORE > DS Concrete Accessories: Dayton Superior A-21-F Flat Tie is used to tie steel frame form panels together. A-21-K Tie Keys are inserted through adjoining panels and the tie key... MORE > DS Concrete Accessories: Dayton Superior A-21-X Flat Tie is used with the A-51 Wedge Bolt to secure and space modular forms.... MORE > DS Concrete Accessories: Dayton Superior A-22 Spreader Cleats are used to form footers or grade beams up to 32" high. On panels up to 24" high the cleats are spaced at 32" max... MORE > DS Concrete Accessories: Dayton Superior Rapi-Tie system is a simple plywood forming system for light forming applications. A-25 ties are inserted through 1/4" x 1" slots in t... MORE > DS Concrete Accessories: Dayton Superior A-27 and A-27-M Turnbuckle Form Aligners are designed to accurately position and plumb vertical forms. The turnbuckle section of the a... MORE > DS Concrete Accessories: Dayton Superior A-27 and A-27-M Turnbuckle Form Aligners are designed to accurately position and plumb vertical forms. The turnbuckle section of the a... MORE > DS Concrete Accessories: The Adjustable Kicker is the only steel brace that attaches to wood or steel forms and can be used on dirt, wood, or concrete surfaces. The quick adju... MORE > DS Concrete Accessories: Dayton Superior A-29 Snap Tie Wrench is designed to facilitate snap tie breakback.... MORE > DS Concrete Accessories: Dayton Superior A-30 Breakback Wrench is designed to break off the snap tie ends after the formwork has been stripped. ... MORE > DS Concrete Accessories: Dayton Superior A-31 Hex Head Snap Tie Socket is used with a standard socket wrench to break A-4 Hex Head Snap Ties. ... MORE > DS Concrete Accessories: Dayton Superior A-40 Cone Removal Wrench has a "T" handle for easy turning and features a lag screw thread to penetrate the center hole of a snap tie ... MORE > DS Concrete Accessories: Dayton Superior A-44 Stainless Steel Snap Ties are available for applications that require ties resistant to rusting or other similar corrosion. ... MORE > DS Concrete Accessories: Dayton Superior A-45 Base Ties are used at the base and/or top of modular type formwork. Standard base ties are furnished without cones or breakback, ... MORE > DS Concrete Accessories: Dayton Superior A-35 Strongback Tie is used with any single waler form system to attach strongbacks to the wales. Safe working load is dependent on th... MORE > DS Concrete Accessories: Dayton Superior A-46 Loop Panel Ties are designed for securing and spacing modular type forms. ... MORE > DS Concrete Accessories: Dayton Superior A-48 Gang Loop Tie is similar to the A-46 tie, above, but has end dimensions extended to 4-15/16". The longer length allows the tie to... MORE > DS Concrete Accessories: Dayton Superior A-51 Wedge Bolt is used with A-46 Loop Panel Ties, B-21 Plylags, etc., to secure modular type forms. ... MORE > DS Concrete Accessories: Dayton Superior A-52 Z Tie Holder is used in conjunction with the A-53 Waler Tie to secure double 2x lumber wales to modular type forms. ... MORE > DS Concrete Accessories: The A-53 Waler Tie is available in two sizes to accommodate 2 x 4 and 2 x 6 lumber. ... MORE > DS Concrete Accessories: Dayton Superior Concrete Plugs are used to patch plastic cone tie holes. The A-54 is easily installed using Dayton Superior J-58 Epoxy or J-40 Day-Che... MORE > DS Concrete Accessories: The A-55 Sure-Lock Tie is manufactured with self-centering 1" x 1" plastic cones that provide a nominal 1" breakback. Other breakbacks and waterseal w... MORE > DS Concrete Accessories: The A-56 Sure-Lock Bracket is a sturdy bracket designed with a rotating arm that captures the loop of the A-55 tie and firmly secures the tie and wale... MORE > DS Concrete Accessories: The A-57 Sure-Lock Strongback Bracket attaches to the back of the A-56 bracket and holds a 2 x 4 strongback firmly to the form. ... MORE > DS Concrete Accessories: Dayton Superior A-56-A Speedy Bracket is a simple one-piece bracket designed to accept the A-55 Sure-Lock Tie, above. The A-56-A bracket will accommod... MORE > DS Concrete Accessories: Dayton Superior A-57-A Stiffback Bracket attaches directly to the A-56-A Speedy Bracket and rigidly secures two 2 x 4 strongbacks in place to strength... MORE > DS Concrete Accessories: Dayton Superior A-63 Strongback Loop Tie is a long-ended loop tie used in conjunction with the A-52 Z Tie Holder to securely attach wales and strongba... MORE > DS Concrete Accessories: Dayton Superior A-92 Waler Brackets eliminate the potential hazard of toe-nailed walers separating from the studs. The bracket can be nailed to either... MORE > DS Concrete Accessories: Dayton Superior A-93-C Adjustable Safety Rail Bracket is designed to support a 200 pound load, applied from any direction, with minimum deflection of ... MORE > DS Concrete Accessories: The Sure Guard Rail Post System opens wide and tightens quickly, allowing for application to practically any project. The post is easily installed uti... MORE > DS Concrete Accessories: The Dayton Superior 4"x4" Shore Clamp is designed to be used hundreds of times. The simple design consists of a rectangular collar of high strength ro... MORE > DS Concrete Accessories: Dayton Superior SpeedStep Bracket (A-100) is a reusable, high grade composite resin forming bracket designed to simplify layout, set-up and stripping ... MORE > DS Concrete Accessories: The D-1-PA bolts are furnished with a 1/2" NC threaded nut and a cut washer. Dayton Superior D-1-PA Anchor Bolts are manufactured with 1-1/2" of 1/2" ... MORE > DS Concrete Accessories: Available with 1/2 inch or 3/4 inch Coil or NC threads. ... MORE > DS Concrete Accessories: Available with 1/2 inch or 3/4 inch Coil or NC threads. ... MORE > DS Concrete Accessories: Available with 1/2 inch or 3/4 inch Coil or NC threads. ... MORE > DS Concrete Accessories: Dayton Superior D-1-S Anchor Bolt Sleeve allows one size sleeve to accommodate two or more anchor bolt diameters. The unique high-density polyethylene... MORE > DS Concrete Accessories: The D-12 Rod Clamps are cast malleable iron clamps used with smooth or deformed 1/4", 3/8" and 1/2" rod to tie forms. The rod is clamped securely by a... MORE > DS Concrete Accessories: Dayton Superior D-12 Rod Clamps are cast malleable iron clamps used with smooth or deformed 1/4", 3/8" and 1/2" rod to tie forms. The rod is clamped s... MORE > DS Concrete Accessories: Dayton Superior D-12-F Form Clamp is available in two sizes to handle all smooth and deformed rod diameters from 1/4" to 5/8". This strong and versati... MORE > DS Concrete Accessories: Dayton Superior D-14 Tightening Wrench is placed over a smooth or deformed rod behind a rod clamp and is used to draw the assembly tight allowing the ... MORE > DS Concrete Accessories: Dayton Superior D-21 Rebar Clip and Form Spreader was developed to serve as a combination form spreader and rebar spacer when the forming does not pro... MORE > |